News

Increasing the range of applications into which the compact PPA15xx series power analyzers can be used, N4L extend the current range from 20Arms to 30Arms with the introduction of a high current version.
Also in the PPA range, the PPA55xx series extends its lead in wideband power measurement …

In relation to aircraft applications, a standard called DO160 defines the minimum test conditions and corresponding test procedures for airborne equipment.
Within a POWER section of the standard, the measurement of voltage and current harmonics is defined and the requirements of this measurement are significantly more demanding than harmonic tests typically …

Providing a solution to applications that require discrete harmonics and also interharmonics or non harmonic frequency domain information, the latest firmware version of the PPA5500 series power analyzer includes an FFT based spectrum mode.
[intlink id="267" type="page"]Find out more about the PPA5500 series Precision Power Analyzer[/intlink]

Offering 1, 2 and 3 phase options in a compact 2U high and half rack width instrument, the new PPA1500 series joins our range of precision power analyzers to ensure that N4L provide the optimum solution to almost any power measurement application and …

In recognition of the technical innovation and commercial success of our PPA series precision power analyzers, N4L have received the “INNOVATION 2010″ category in this years Queens Awards for Enterprise.

Incorporating an enhanced version our innovative analogue technology to achieve the widest voltage and current measurement ranges of any power analyzer plus increased processing power, 1GB internal memory, colour display and class leading accuracy, the PPA5500 leads the field in precision power analysis.

We are pleased to announce the appointment of [intlink id="414" type="post"]PDS Instruments Ltd[/intlink]. as the exclusive distributor of N4L products in the UK and Ireland. PDS bring years of experience in test equipment sales and support to our range of world leading measurement instruments.

Including a Frequency Selective Voltmeter, Impedance Analyzer, VSWR Meter and Oscilloscope, the SLM3505 provides a complete measurement solution to power line and audio tone communication systems. While being compact and portable with operation from a 12dc supply or internal battery, a sophisticated electronic design, intuitive user interface and bright full …

Adding to the extensive harmonic analysis functions of the PPA range, the harmonic series is extended to 100 along with the addition of an harmonic phase function.

We are pleased to announce the signing of Quatek Co., Ltd. as the exclusive distributor of N4L products in Taiwan. Established as a high calibre distributor of professional instrumentation, Quatek make a strong addition the international network of N4L distributors.

In addition the existing range of impedance functions, N4L introduce new firmware for the PSM17xx series analyzers to provide direct measurement of Admittance, Conductance and Susceptance

We are proud to announce the signing of Miko-Kings Instruments Ltd. as the exclusive distributor of N4L products in China and Hong Kong. With years of experience in the field of measurement instrumentation, Miko provide the high quality sales, support and service that is synonymous with N4L distribution.

[intlink id="241" type="page"]N4L …

The number of steps in High speed FRA and Impedance sweeps is increased from 250 points to 2000 points with frequency step speeds up to 50 steps per second.

The number of steps in High speed FRA and Impedance sweeps is increased from 250 points to 2000 points with frequency step speeds up to 50 steps per second.

Maintaining the proprietary low inductance design of all N4L precision shunts, the HF200 and HF500 offer a precision measurement solution to a wider range of power applications.

For power applications such as high frequency drives or low power lighting ballasts that may be influenced by the capacitance of typical voltage measurement devices, the Ultra Low Capacitance Probe is designed to present exceptionaly low capacitance to ground.

Used in conjunction with the PSM1735 Phase Sensitive Multimeter, the TTF35 provides a simple, fast and accurate measurement solution to ADSL and VDSL telecom filter attenuation testing.

With a 19″ width chasis and modified rear panel design, the PPA2600 offers convenient rack mounting and the option for 50Arms direct current inputs.

While maintaining the flexibility and convenience of 1 to 3 phase ‘base’ instruments, Master Slave mode provides fully synchronised analysis for power applications with up to 6 phases with the PPA2500 Series Precision Power Analyzers

With models from 100mA to 5000A and either AC responding or AC + DC designs, the N4L current transformer range includes a current sensing solution when in-line shunt connection is not possible.

N4L moves into a larger facility to support the rapidly growing PPA power analyzer range and continued success of the PSM frequency response analysis products.

Simplifying the test of maximum inrush current for single phase devices up to 10Arms, the Phase Controlled Inrush Switch is combined with any PPA range power analyzer gives precise phase controlled switch-on up to 300Apk

Maintaining our philosophy of continual product development, an upgraded version of PSMcomm is launched that incorporates recently enhanced functions in the PSM17xx series frequency response analyzers.

Extending our range of laboratory power amplifiers, the LPA05 A or B provide x10 gain with outputs of up to 40Vpk or 8Apk from DC to 1MHz

Power analyzer accuracy certification: Unique to N4L, all [intlink id="250" type="page"]Power Analyzers[/intlink] are supplied as standard with certification of measurement accuracy over the complete operating range of DC to 2MHz.

Sample calibration certificate (PDF, 28KB)

Combining years of experience in high frequency measurement techniques with innovative developments in analogue and digital design, N4L introduce the very latest in power analysis instrumentation.

Using front panel emulation of the PSM1700 series, PSMcomm provides PC control, presentation and data storage of all PSM functions plus a ‘sequence’ mode to simplify tests against a series of user defined test limits.

Strategically located in the Midwest U.S. heartland in Chicago’s suburban high-tech corridor, Newtons4th North America provides sales, support, calibration and service facilities for the N4L product line in North America, South America and Canada.

When using our PSM range in LCR mode, compensation of the parasitic impedances found in connection cables has always been offered for specified single frequencies. Now, a versatile sweep compensation mode permits open and short circuit compensation over any selected frequency range with a user selectable number of steps and …

Complementing our range of [intlink id="286" type="page"]passive injection transformers[/intlink], the LFIM uses an active opto-isolated design to permit isolated signal injection in control loop testing applications from DC to 100kHz.

 [intlink id="286" type="page"]Injection transformer range[/intlink]

Incorporating a high performance toroidal ferrite and high voltage isolation design (600V Cat II), the HV injection transformer provides isolation of a PSM signal generator in control loop analysis applications and will operate over a frequency range of 5Hz to 15MHz.

Designed for use with the PSM1700 and PSM1735 units, the IAI provides increased impedance analysis accuracy and extends the frequency range of LCR measurements 35MHz.

Utilising an innovative design unique to N4L, the HF series shunts provide a high precision current sensing solution for power measurement applications from DC to 1MHz.

Increasing our range of PC software options, [intlink id="255" type="page"]CommGRAPH[/intlink] offers versatile computer control of FRA, PAV and LCR measurement functions on any PSM unit. The software provides data presentation in tables or graphs and allows data to be stored in .txt …

Covering an exceptional frequency range of over 12½ decades (10µHz to 35MHz) PSM1735 NumetriQ uses direct digital analysis and heterodyning techniques to achieve outstanding accuracy (eg. high frequency phase accuracy of 0.1° + 0.0001°/kHz) at a fraction of the price of other high frequency instruments. [intlink id="269" type="page"]PSM1735 NumetriQ[/intlink] uses the …

PsimetriQ PSM1700 now has the capability to record up to 8000 measurements at a user defined interval from 10ms to 1 hour. Up to 4 results may be stored per record, and either saved to RAM or directly into non-volatile memory. Each function may then be viewed as a table …

The frequency range of the PSM1700 PsimetriQ has been extended to 10µHz to 1MHz. The lower frequencies are useful for analysis of very slow control systems such as thermal management in buildings.

[intlink id="268" type="page"] PSM1700 Phase sensitive multimeter[/intlink] (Psimetric)

Our new video sample illustrates various display options available to a user of the PSM1700 PsimetriQ when in Frequency Response Analysis mode.

Newtons4th Ltd have appointed distributors for the european and far-eastern markets. Please view our distributor details page for the full detail.

PSM1700 Psimetriq, the latest addition to the PSM range from N4L provides a low cost phase sensitive measurement instrument for design, test and production engineers at a level of performance and flexibility only available before now from much more costly test equipment. Incorporating a large LCD graphics display, intuitive user …

PSM1700 Psimetriq, the latest addition to the PSM range from N4L provides a low cost phase sensitive measurement instrument for design, test and production engineers at a level of performance and flexibility only available before now from much more costly test equipment. Incorporating a large LCD graphics display, intuitive user …

Newtons4th Ltd have moved to a new central facility within Mountsorrel. Our new address is: 30 Loughborough Road, Mountsorrel, LE12 7AT.